World Library  
Flag as Inappropriate
Email this Article

Replica Titanic

Article Id: WHEBN0029302884
Reproduction Date:

Title: Replica Titanic  
Author: World Heritage Encyclopedia
Language: English
Subject: RMS Titanic, Olympic-class ocean liner, Secrets of the Titanic, Halomonas titanicae, William Mintram
Publisher: World Heritage Encyclopedia

Replica Titanic

There have been several proposals and studies for a project to build a replica ship based on the famous Olympic-class ocean liner, RMS Titanic. A project by South African businessman Sarel Gaus was abandoned in 2006, and a project by Australian businessman Clive Palmer was announced in 2012, known as the Titanic II.

Economic viability of a recreation

In 1989, Popular Mechanics magazine explored the feasibility of such projects, in consultation with Neil Gallagher of the Webb Institute.[1] The article discussed the significant changes to the original design required to produce a safe and economically viable ship. Most of the changes would appear below the water line:

  • Welded, not riveted, hull
  • Bulbous bow for greater fuel efficiency
  • Enlarged rudder and bow thrusters for increased maneuverability
  • Horizontal stabilizers
  • Diesel electric generation and propulsion would free up the cavernous space used by Titanic’s 159 coal furnaces and 29 boilers
  • Vacated space could be used for waste processing, water treatment, and air conditioning.

Extra funnels not needed for diesel generator exhaust would be dummy funnels. The economic feasibility was more uncertain. The engineering challenges would drive the construction costs to approximately twice the cost of a modern cruise ship.

Sarel Gous project (1998–2006)

South African businessman mogul Sarel Gous proposed building Titanic II in 1998. Gous said he had got hold of the original drawings for the famous ship and now wanted to fulfill his dream. If the ship had been completed, she would have had a length of 290 metres and a width of 33 metres, making her the largest cruise liner in the world.[2]

Gous originally considered constructing the ship in Durban, South Africa. Having commissioned a feasibility study into the project with Harland & Wolff shipyard in Belfast,[3] he presented the proposal to Belfast City Council in June 2000. The project was priced at around £500 million.[4] In November 2000, Gous signed an agreement with a Monaco-based firm to finance the construction of the ship. He stated that construction would begin within the next nine months.[5] The brand name of the company that would operate the Replica Titanic was to be the White Star Line, acting as a revival of the now defunct shipping line.

From the outset the intention was to build an exact copy but with enough lifeboats. Due to SOLAS regulations, this proved to be impossible to meet. Modern fire-prevention regulations prohibit the large-scale use of wood in the interior.[6] It is also no longer legal to have lifeboats mounted as high as they were on Titanic. Standards now require that life boats be mounted no higher than 15 m (49 ft) above the waterline. A replica Titanic would require a height exemption similar to that granted the RMS Queen Mary 2.

In 2006 the Replica Titanic project was scrapped due to high costs and a low amount of support for the project.[7][8] The last Titanic survivor, Millvina Dean, had expressed her opposition to the project.[9]

Clive Palmer project (2012)

On 30 April 2012, Australian billionaire Clive Palmer announced a project to build a near replica of the Titanic.[10][11] The maiden voyage is scheduled for 2016. The ship would be as close as possible in design to the original Titanic, but underneath would be a ship of modern specifications with stabilisers, diesel electric propulsion (utilising Azimuth thrusts) & the health and safety features found onboard modern cruise vessels.

Marine engineering company Deltamarin was hired to design the ship.[12]

According to the general arrangement published on 17 July 2012,[13] the length of the replica is the same as that of the original ship, but it will be 4.2 metres (13 ft 9 in) wider and its draught will be smaller by 3 metres (9 ft 10 in). The lower deck cabins are said to be "typical for a modern cruise vessel" while cabins and public rooms from D deck upwards are "as in the original ship".[14]


  1. ^ Wilson, James (September 1998 p. 56-59). Titanic Reborn.  
  2. ^ "Titanic2". Titanic Norden. 12 December 2004. Retrieved 5 February 2011. 
  3. ^ Ringshaw, Grant. "A Titanic task". Daily Telegraph. Retrieved 24 August 2012. 
  4. ^ BBC News | Northern Ireland | Tycoon presents Titanic II proposal
  5. ^ Dreams afloat to build Titanic II
  6. ^ "Titanic Replica". Retrieved 5 February 2011. 
  7. ^ Louis, Epstein. "To Build a New Titanic?". Retrieved 11 October 2012. 
  8. ^ "Le Titanic reconstruit". Retrieved 5 February 2011. 
  9. ^ "Geredde baby tegen herbouw Titanic". Retrieved 5 February 2011. 
  10. ^ "Clive Palmer plans to build Titanic II". Sydney Morning Herald. 30 April 2012. 
  11. ^ "Titanic II to Be Built by Billionaire Palmer, Chinese Yard". Bloomberg. April 30, 2012. 
  12. ^ "Titanic II a step closer to reality". Brisbane Times. 19 June 2012. 
  13. ^ "Clive Palmer reveals detailed plans for Titanic II, featuring added safety features and bans on pensioner gambling". Courier-Mail. 17 July 2012. 
  14. ^ Deltamarin (12 July 2012). "General Arrangement Titanic II Project". Retrieved 17 July 2012. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.